EMERSON EWT1321
Owner's Manual

PREPARATION FOR USE
LANGUAGE SELECTION
If you want to change the language of the on-screen menu, follow the procedure below. 1 Connect the power cord to a standard AC outlet. 2 Press the POWER button to turn on the TV. 3 Press the MENU button so that the menu display appears on the TV screen. 4 Press the CH(annel) � or � button to point to "[ENGLISH]". 5 Select "ENGLISH" or "ESPA�OL" = Spanish by using the VOL(ume) � or � button. 6 Press the MENU button to exit the menu.
PICTURE CHANNEL SET [ENGLISH]ESPA�OL V-CHIP SET UP CAPTION [OFF]

4 Press the CH(annel) � or � button to point to "AUTO MEMO". Then, press the VOL(ume) � button. The tuner scans and memorizes all active channels in your area.
� The TV distinguishes between standard TV channels
ADD/DELETE AUTO MEMO

and cable channels.
� When AUTO MEMO action is completed, the lowest

memorized channel reappears on the screen.
� When you press the CH(annel) � or � button after

selecting AUTO MEMO, the tuner will stop at the memorized channels only.
� The TV may recognize TV channels to be CATV channels

PICTURE CHANNEL SET [ENGLISH]ESPA�OL V-CHIP SET UP CAPTION [OFF]

by the receiving conditions. In this case, try AUTO MEMO action again in the fine receiving conditions.

[ADD/DELETE FUNCTION] 1) Press the MENU button so that the menu display appears on the TV screen. 2) Press the CH(annel) � or � button to point to "CHANNEL SET". Then, press the VOL(ume) � button. 3) Press the VOL(ume) � button so that "ADD/DELETE" is selected. 4) Use the CH(annel) � or � button to select the channel you wish to put into memory or to erase from memory. Note: The display will return to the screen in about 10 seconds.
PICTURE CHANNEL SET [ENGLISH]ESPA�OL V-CHIP SET UP CAPTION [OFF] PICTURE CHANNEL SET [ENGLISH]ESPA�OL V-CHIP SET UP CAPTION [OFF]

CHANNEL PRESETTING
To preset a channel or to change a preset channel, follow the procedure below. 1 Press the POWER button to turn on the TV. 2 Press the MENU button so that the menu display appears on the TV screen. 3 Press the CH(annel) � or � button to point to "CHANNEL SET". Then, press the VOL(ume) � button.

Perform "ADD/DELETE" function while this display appears on the screen. Press the VOL(ume) � or � button to light up the channel number � in LIGHT BLUE if you wish to add the channel into memory. � Press the VOL(ume) � or � button to light up the channel number in LIGHT RED if you wish to erase the channel from memory. 5) Press the MENU button to exit the menu.

ADD/DELETE AUTO MEMO

PICTURE CHANNEL SET [ENGLISH]ESPA�OL V-CHIP SET UP CAPTION [OFF]

RESUME FUNCTION
If the power fails or is disconnected while the TV is powered on, the TV will turn on automatically when the power resumes.

OPERATIONS
WATCHING A TV PROGRAM
1) Press the POWER button to turn on the TV. 2) Select the desired channel with the CH(annel) � or � button. 3) Adjust the volume to the desired listening level using the VOL(ume) � or � button. 4) Adjust picture controls for a natural looking image. (See "PICTURE ADJUSTMENT".)

PICTURE ADJUSTMENT
1) Press the MENU button so that the menu display appears on the TV screen. 2) Press the VOL(ume) � button so that "PICTURE" is selected. 3) Select the feature you wish to adjust with the CH(annel) � or � button and adjust it with the VOL(ume) � or � button. GAME MODE Set to the most suitable position for TV GAME. [+] : ON [-] : OFF BRIGHT Adjust until the whitest parts of the picture are as bright as you prefer. [+] : increase brightness [-] : decrease brightness CONTRAST Adjust to increase or decrease contrast. [+] : increase contrast [-] : decrease contrast COLOR Adjust to be brilliant or pale color. [+] : be brilliant color [-] : be pale color TINT Adjust to obtain natural skin tones. [+] : greenish tone [-] : reddish tone : Press the CH(annel) � or � button. Notes:
� In the above steps, the picture adjustment

SETTING THE SLEEP TIMER
The sleep timer function enables you to shut off the power without pressing the POWER button after a desired time period. 1) Press the POWER button to turn on the TV and press the SLEEP button on the remote control . 2) You may change the sleep time with pressing the SLEEP SLEEP 10 button on the remote control repeatedly. The timer is set up to 90 minutes, 10 minutes each time the SLEEP button is To cancel the sleep timer: pushed. (The timer display counts up and sleep timer will Press the SLEEP button repeatedbe displayed on the screen when you press the SLEEP ly until "SLEEP 0" is displayed. button on remote control.) Note: When you disconnect the unit from the AC outlet, or if you have a power failure, the sleep time will be lost.

display will disappear from the TV screen after about 10 seconds unless you press any buttons, even though you may not be finished. Press the MENU and VOL(ume) � button so that "PICTURE" is selected. Then, press the CH(annel) � or � button repeatedly until the the otherreturns to the screen. If you adjust display Picture control after � you set the Game mode to [ON], the Game mode is set to [OFF] automatically. If you want to set the Game mode, reset it to [ON].

CLOSED CAPTION SELECTION
You may view specially labeled (cc) TV programs, movies, news, prerecorded tapes, etc. with either a dialogue caption or text display added to the program. 1) Press the MENU button so that the menu display appears on the TV screen. 2) Press the CH(annel) � or � button to point to "CAPTION". 3) Press the VOL(ume) � or � button to select the mode you wish. 4) When done, press the MENU button to exit the menu.
PICTURE CHANNEL SET [ENGLISH]ESPA�OL V-CHIP SET UP CAPTION [ T1] PICTURE CHANNEL SET [ENGLISH]ESPA�OL V-CHIP SET UP CAPTION [ T2]

: Press the VOL(ume) � or � button.
PICTURE CHANNEL SET [ENGLISH]ESPA�OL V-CHIP SET UP CAPTION [OFF] PICTURE CHANNEL SET [ENGLISH]ESPA�OL V-CHIP SET UP CAPTION [ C1]

PICTURE CHANNEL SET [ENGLISH]ESPA�OL V-CHIP SET UP CAPTION [ C2]

[-] GAME MODE [+] OFF ON

[-]

BRIGHT

[+]

[-]

CONTRAST

[+]

[-]

COLOR

[+]

[-]

TINT

[+]