|
|
|
Who's Online
There currently are 6043 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
IF PRINTED CIRQUIT BOARD WIRING VIEW WAS ONE TONE LIGHTER, THEN 5 STAR RANK HAS TO BE MY CHOISE.
 ;
Very usefull, good quality drawings !
Muito útil encontrei todas as informações necessárias.
;
Wanting to repair a neighbours tape recorder I needed the necessary information, it makes it easier. Although the service manual is described as "Language : English" To my dismay I found that it is entirely written in German, a language I do not understand. At least I now have the schematics which will help of sorts. I may not use this service again due to the laguage difficulty after all when it states English you do not expect it to be entirely in another language.
;
GOOD SERVICE MANUAL.I ALWAYS BUY THERE IF I FIND WHAT I AM LOKING
;
Good quality (clearly readable) manual, I'm glad I could find it here, at a bargain price!
Make sure ... � TV/VCR power must be turned on. � Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording.) NOTE: This unit will ONLY record and view the same channel.
NORMAL RECORDING
You can ONLY watch the same TV program that is being recorded.
OTR (One Touch Recording)
This function enables you to set a recording length simply by pressing the REC/OTR button on the TV/VCR. Make sure ... � TV/VCR power must be turned on. � Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording.) NOTES: � This function CANNOT be done from the remote control.
1
Select the channel to be recorded
Press the number buttons on the CH 10 remote control or the CHANNEL K or L button. Remember: If the TV/VCR is connected to a cable box or satellite box, the TV/VCR must be on CH3 or CH4, then the channel to be recorded must be selected on the cable box or satellite box.
2
Select the tape speed
� Recording starts immediately when the REC/OTR � �
SP
Press the SPEED button to select the desired tape speed (SP/ SLP).
�
3
Begin recording
REC
Press the RECORD button.
SP
� � �
4
Stop recording
Press the STOP button when recording is completed.
button is pressed. When the REC/OTR button is pressed 18 times, the TV/VCR returns to the Normal Recording mode. To stop the OTR operation, press the STOP button on the TV/VCR or on the remote control. To show the remaining time, press the DISPLAY button on the remote control so that �OTR� appears on the TV screen. (It will show up momentarily then disappear.) Recording stops when 0:00 is reached. Please note that in the SLP mode maximum recording time, assuming the tape is started at the beginning, is 8 hours using T-160 (or 6 hours using T-120). If the tape runs out before the end time, the TV/VCR will switch to the Stop mode immediately, ejects the tape and turns itself off.
SKIPPING UNWANTED SCENES DURING RECORDING
Press the PAUSE/STILL button to temporarily stop recording. Press the PAUSE/STILL or RECORD button to resume recording. NOTES: � After five minutes, the TV/VCR will automatically switch to the Recording mode to prevent tape damage.
SP PAUSE
1
Select the channel to be recorded
Press the number buttons on the remote control or the CHANNEL K or L button. Remember: If the TV/VCR is connected to a cable box or satellite box, the TV/VCR must be on CH3 or CH4, then the channel to be recorded is selected on the cable box or satellite box.
2
Select the tape speed
Press the SPEED button to select the desired tape speed (SP/ SLP).
- 19 -
EN
9J27
|
|
|
> |
|
